- Roof Emergency? Call Now | Florida License #CCC1336444
- Emergency Tarping
- Storm Resources
Skip to content Services Provided
A full standing seam metal roof installation was completed at this residence. We started with a full tear-off and disposal of the existing roofing material, followed by a complete deck inspection and assessment before anything went back on. Underlayment was installed to spec, then standing seam metal panels were set and fastened across the full field of the roof. Ridge cap and ridge vent integration were completed at the top, with eave, rake, and drip edge flashing finished at the perimeters. All penetrations — pipes, vents, HVAC — were properly flashed and sealed. Gutters were apron-fitted and the site was cleaned up on completion.
Project Photos
Project Overview
Standing seam metal is one of the most durable roofing decisions a homeowner can make. Where standard shingles require replacement every 15–20 years, a properly installed standing seam system is built to outlast the house. The homeowner made that call, and we installed it to manufacturer spec from deck to ridge.
Seam alignment, panel fastening, and flashing integration are where standing seam jobs get done right or get done wrong. We ran this one clean — tight seams, solid penetration flashing, and correct ridge termination throughout.
Service Type
Location
Year
Client Type
Get a free inspection from Florida’s Go-To Roofing Crew.
Project Location
Sunset Roofing serves residential homeowners across the area with metal roofing systems built for Florida’s climate.
What Clients Say
Each project tells a story of careful planning, skilled execution, and dependable service—completed on time and built to last.
Residential
Residential
Residential
Book a free roof inspection. We show up, document everything in a full photo report, and give you a straight answer — repair, replace, or claim. No pressure.
