North Tampa residential homes are a mixed bag — older bungalows alongside well-kept midcentury properties, and newer construction that fits into established neighborhoods. When this
Tampa homeowner decided to go metal, the goal was a system that would hold up in a dense
urban environment and look sharp doing it. Premier Metal Standing Seam on a 6/12 pitch checks
both boxes.
We ran the full tear-off, assessed the deck across all 2,778 square feet, and addressed anything
that needed it before the first panel went up. The 6/12 pitch is a clean working slope — steep
enough for good drainage, manageable for the crew, and the right angle for standing seam to
read well visually from the street. Panel runs were measured, cut, seamed, and trimmed out at
every edge condition. The system finished with a clean ridgeline and tight eave trim on all sides.
One week from start to finish. 2,778 square feet of metal roofing on a Tampa home that’s going to
outlast whatever Florida decides to throw at it.